When do we use the OBD splitter cable?

• Related Articles

• Why can't I use NexCruise in all my cars, why its only one car one cruise?

  Because every car has a different firmware and different cable set for NexCruise which is why one unit of NexCruise is configured specifically for one car which is why it cant be used in multiple cars. If you want to use NexCruise in another vehicle, ...

• Can we use CAR.OS app on multiple devices for same registered user?

  Yes we can use the CAR.OS app on multiple devices. How to Do It Install the CAR.OS app on the new device. Sign in using the same phone number that is registered with your NexCruise unit. When prompted, enter the OTP sent to the registered number on ...

• 1.Fitting NexCruise in car

  ? NexCruise Installation Instructions ? Step-by-Step Cable Connections Remove the Original Pedal Cable Locate the existing cable connected to the car's accelerator pedal. Press the locking tab on the connector and gently remove it. Connect ...

• 2.Dos and donts for installation

  When you install, ensure the following: ✅ Dos for NexCruise Installation the car is completely powered off before starting the installation. ensure the bypass switch is easily accessible. Do use gentle curves when routing cables — avoid sharp bends. ...

• NexCruise (2022) quick install instructions

  Connecting To install your NexCruise, follow these steps. Make sure the car is turned off and handbrake is engaged before your proceed. 1) Disconnect the Accelerator pedal from the VCU connector. 2) Connect the NexCruise pedal cable labelled "TO ...