✅ Dos for NexCruise Installation

• the car is completely powered off before starting the installation.

• ensure the bypass switch is easily accessible.
  

• Do use gentle curves when routing cables — avoid sharp bends.

• Do secure all cables using cable ties, especially around moving parts.

• Do leave enough slack near connectors to prevent strain on pins.

• Do double-check port labels (NC-PORT A, B, C, etc.) before plugging in.

• Do perform a functionality test after installation: check for power lights and system indicators.

• Do place the NexCruise unit in a dry,moving free area inside the vehicle cabin.

❌ Don’ts for NexCruise Installation

• Don’t route cables near sharp edges, hot surfaces, or moving parts.

• Don’t connect anything to NC-PORT D unless instructed (used only for certain cars needing a brake sensor).

• Don’t overtighten cable ties — this can damage wires, especially near the connectors.

• Don’t plug in the NexCruise power (OBD) until all other cables are connected.