4. How to do A-pedal calibration
What is A-pedal calibration?
In an ideal world, two cars with same brand and same model must be same, but in real world, they are different.
Specifically, the signal that the A-pedal gives in two different cars is different.
This procedure personalizes your NexCruise for your specific car, so that the throttle response that you expect is crisp and immediate.
A-pedal calibration procedure
During the entire procedure:
a) Never press the A-pedal.
b) Don't turn on the engine.
c) Don't turn on AC, headlights or any other load on engine.
Step 1: Turn on the car in Acc mode. Don't crank the engine.
Step 2: Start calibration by long pressing the Sports mode button when system is in INIT state (STATE LED = Cyan)
Upon staring the calibration, the State LED will change to green.
Step 3: Long press the centre (cruise) button to commit calibration. The state LED should change back to CYAN.
Step 4: Turn off the car, wait for the NexCruise to turn off (light bar should turn off).
The pedal calibration is complete.
Click on the link provided to watch related videos:- https://youtu.be/qoW4SECtyPM
Related Articles
Why is there a slight change in the Accelerator pedal response to my car after I installed NexCruise?
The NexCruise works by intercepting and processing the signal going from Accelerator pedal to the car's ECU. Technically, NexCruise is an ECU itself and does processing on the incoming A-pedal signal before passing it on to the car. This processing ...How does NexCruise works?
NexCruise is an ECU which connects to the Car's accelerator pedal. NexCruise Modulates the Accelerator Pedal signal to use features like Cruise Control, Dial Driving, Cruise Resume, Speed limiter, Eco Mode and Sports Mode. Working of NexCruise It ...NexCruise (2022) quick install instructions
Connecting To install your NexCruise, follow these steps. Make sure the car is turned off and handbrake is engaged before your proceed. 1) Disconnect the Accelerator pedal from the VCU connector. 2) Connect the NexCruise pedal cable labelled "TO ...Main unit wiring related
Introduction Check engine light appears on your car's dashboard, and looks something like this: A healthy vehicle is not expected to show this light. If this has appeared during/after your installation of NexCruise, Observations Turn ON the car and ...What are the error codes in NexCruise?
Introduction If NexCruise encounters an error, like a loose cable etc, it indicates the same on the light bar in a colour-coded fashion. NexCruise is programmed to error in side of safety. That is, if in doubt, indicate an error. So, sometimes it ...